3-way Electric Ball Valve-(PDF)

3-Way Electrically Actuated Ball Valves

Motorized Diverter or Sampling Valves -- Use as 2 inlets or 2 outlets

Please NoteSeries TEBV has been superseded by Series TEBVA, effective August 2009. If you are not redirected automatically, please followthis link

Features:

• Rugged plastic construction for corrosive atmospheres.
• Direct manual override with visual position indication.
• Flow direction indicators and Running lights.
• Thermally protected, heavy duty motor.
• IP-54/Nema 4X water and dust tight enclosure.
• Easily attached to MBV Ball Valves in a minute or less; no exotic modifications or special adapter kits required.
• Simple connections for remote operation and position indication.
• All three ports are true union for cost, installation time, and space savings.

Valve Design:

Valve is ordered with either a two-hole or three-hole ball. The two-hole ball switches from one inlet (or outlet) to the other, with a momentary no-flow condition. The three-hole ball ensures that flow is uninterrupted, with a momentary mixing of flow from the two ports. It is suggested that you specify the two-hole ball if you want to prevent the two streams from mixing, and specify the three-hole ball if you are concerned about dead-heading with a momentary no-flow condition. If you are unsure, you are invited to contact our Technical department for assistance at (973) 256-3000.

Materials of Construction:

Actuator enclosure is primarily PETRA, a rugged, corrosion-resistant thermoplastic. Other materials exposed to the atmosphere include Lexan, Stainless Steel, and Buna-nitrile. Valve materials are PVC or Corzan®. Valve seats and bearings are PTFE. Wetted seals are Viton® or EPDM.

Temperature and Pressure:

Pressure rating for both PVC and CPVC is 175 PSI at 75 degrees F (24 C). Maximum temperature for PVC is 140 degrees F (60 C); maximum temperature for CPVC is 180 degrees F (82 C).

Wiring Diagram:

If momentary signal is desired, standard timing relays can be used. Wiring diagram is available from our Technical Group; 973-256-3000.

Specifications:

Housing Material: Petra (Terephthalate) ThermoplasticSeals: Buna NAmbient Temp.: 0-50 degrees CRating: IP-54, NEMA 4XVoltages: 24, 120, 220, 230, 240 - (50 or 60 Hz)Open/Close Time: 12 secondsValve Sizes 1/2" 3/4" 1"Cv Factors: 4.0 8.0 13.0Duty Cycle: 50% @ 70 degrees FValve Sizes 1-1/2" 2"Cv Factors: 38.0 39.0 Duty Cycle: 20% @ 70 degrees F

Dimensions:

CAD Drawing:

If you need a non-CAD drawing of Series TEBV, you may simply right-click the dimensional drawing above, and "save as" in your desired directory.

If you would like a full-fledged .dwg file, please read the following note, then click on the CADlink icon below.

NOTE THAT YOU WILL NEED TO DOWNLOAD TWO SEPARATE FILES TO GENERATE A DRAWING OF SERIES TEBV:First, download the TMBV file, which is the 3-way ball valve by itself, then download the EBV file, which is the actuator. Download EBV-65.DWG for 1/2" thru 1" valves. Download EBV-104.DWG for 1-1/2" and 2" valves. By combining the drawings, you will have TEBV.

Please Note系列TEBV正在分阶段out, and being replaced bySeries TEBVA, effective August 2009.

HELPFUL LINKS:

3-Way Solenoid Valves:If you need the electric actuation of TEBV, but perhaps you need instantaneous on/off control, or a much smaller sized valve, or a lower-cost valve...Series THPis a compact 3-way solenoid valve.

球阀索引页-- Overview and links to all ball valves, actuators, and accessories. Possibly the page you were on prior to this one.

Series MBV -- True BlueBall Valves-- Manual version of Plast-O-Matic's popular ball valveline; constructed with integral mounting lugs for easy addition of anactuator when needed. Features also include Trunnion design, reinforced shaft and PTFE thrust washer. 2-way and 3-waydesigns. Socket, threaded, flanged ends, NPT, BSP or Metric; customizingavailable.

Series EBV -- ActuatedBall Valves-- Electrically powered actuators for 2-way and 3-wayball valves, all sizes. Features Standard Manual Override.

Series ABV -- ActuatedBall Valves——气动或液压致动器s for2-way and 3-way ball valves, sizes 1/2", 3/4", and 1". Air x air and "failsafe" air x spring models available; converts easily between types. Manualoverride standard.

Series ABR -- ActuatedBall Valves——气动或液压致动器s for2-way and 3-way ball valves, sizes 1-1/4", 1-1/2", and 2". Air x Air and"fail safe" Air x Spring models available. Manual override standard on airx air, optional on air x spring version. Air x spring converts easilybetween fail safe "open" and fail safe "closed."

Series TMBV --3-way Manual Ball Valves-- Explanatory page for 3-way ball valves, all sizes. These are the valves that serve as the base for the actuated packages depicted on this webpage.

Series TABV & TABR --Actuated Ball Valves-- Explanatory page for pneumatically orhydraulically actuated 3-way ball valves, all sizes. For actuatorspecifications, use the above links for the appropriate size.

Series LMBV --Lateral Reducing Ball Valve-- Explanatory page for lateral reducingball valves which simplify lateral connections.

Series Z-Vent MBV --Vented Ball Valve for Sodium Hypochlorite-- Vented ball valve for sodium hypochloriteand other applications prone to outgassing.

Series LS --Limit Stops-- For use with actuated ball valves.

Series SW --Limit Switches-- For use with actuated ball valves.

Air-Operated Diaphragm Valves and Globe Valves-Perhaps your application requires more rapid shut-off, or you want to use line pressure to open the valve, or have other reasons you don't specifically want a ball valve. If so, True Blue ASO, BSD, or BSR is likely to meet your needs.

Online Pressure DropCalculator-- Allows you to easily determine the probable pressuredrop across a valve.Note: For comparison and illustrative purposesonly; not to be relied on for system design.

5 Most Common Mistakes When Specifying Valves

Valve Pressure Loss & Flow - Q&A and Equations
(Explains Cv and Delta P, how to better specify valves, etc.)

Top of Page

Kynar® is a registered trademark of Elf Atochem.,
Corzan™ is a trademark of Noveon, Inc.

TRUE BLUE® and FAIL-DRY® are registered trademarks of Plast-O-Matic Valves, Inc.
CADlink© Plast-O-Matic Valves, Inc. 2001

Copyright � 1997-2009 Plast-O-Matic Valves, Inc.

DID YOU KNOW-When you call us with a technical question, or a concern, problem, or any reason at all, you are assured of speaking directly to a valve specialist or engineer.