POM Logo

POM Home Page Links to every product page by type and series.  Very helpful for finding your way to a specific, known product quickly... Technical Information Hub; has applications, FAQs, how to avoid valve specifying mistakes, etc.  If you're really into valves, this is undoubtedly the page you want Company Information -- contact info, pictures of our plant and people, links to various pages that tell you EVERYTHING YOU WANT TO KNOW ABOUT PLAST-O-MATIC! Distributors and Industry Links.  This is a clickable map that will whisk you off to your nearest distributor Quote Request Form.  Need to know the cost of a valve?  Or perhaps you have a special custom valve you'd like quoted?  Either way, please click here.

3-Way Manual Ball Valves

Diverter or Sampling Valves -- Use as 2 inlets or 2 outlets

3-way Ball Valves in PVC and CPVC for acid and other aggressive chemicals

Features:

  1. Reinforced shaft (stem).
  2. Dual o-rings on shaft.
  3. PTFE thrust bearing on shaft.
  4. PTFE seats, pre-energized with o-rings.
  5. Trunnion Design -- top and bottom support of ball. Trunnion design allows closed segment of valve to be disconnected under full line pressure, with no danger of blow-out. Valve cannot be piped in backwards.
  6. Full concentricity and mirror smoothness of ball assures easy, smooth, leakproof operation.
  7. Dual sliding seats, each with triple o-rings.
  8. All three ports are true union for cost, installation time, and space savings.
  9. Flow direction indicator on handle.
  10. tabv_3_way_ball_valve.jpg

    Photo shows two True Blue 3-Way Manual Ball Valves in CPVC, with an actuated valve behind. Photo also shows external mounting lugs for easy installation and piping support.

    Valve Design:

    Valve is ordered with either a two-hole or three-hole ball. The two-hole ball switches from one inlet (or outlet) to the other, with a momentary no-flow condition. The three-hole ball ensures that flow is uninterrupted, with a momentary mixing of flow from the two ports. It is suggested that you specify the two-hole ball if you want to prevent the two streams from mixing, and specify the three-hole ball if you are concerned about dead-heading with a momentary no-flow condition. If you are unsure, you are invited to contact our Technical department for assistance at (973) 256-3000.

    3-hole and 2-hole ball selection is determined by application

    The bottom trunnion design element is accomplished via a circular thermoplastic sleeve fitted into the bottom hole of the ball. This sleeve locks the ball into the base of the valve, much like the typical trunnion found in the True Blue 2-way valve. After over two decades of proven design superiority, Plast-O-Matic remains the only industrial thermoplastic ball valve manufacturer to employ the trunnion principle. "Blocking" type ball valves, no matter how well designed, will result in uneven strain on the ball and shaft as they are tightened and especially during flow & pressure conditions -- a misaligned ball eventually causes leaks. The trunnion design, on the other hand, assures a perfectly aligned ball.

    Materials of Construction:

    Valve body and union materials are Geon® PVC or Corzan® CPVC. Valve seats and bearings are PTFE. Wetted seals are Viton® or EPDM. Steel shaft support is not in wetted area of valve. Valve handle is corrosion-resistant thermoplastic.


    Temperature and Pressure:

    Pressure rating for both PVC and CPVC is 175 PSI at 75 degrees F (24 C). Maximum temperature for PVC is 140 degrees F (60 C); maximum temperature for CPVC is 180 degrees F (82 C).

    Specifications:

    Valve Sizes 1/2" 3/4" 1"Cv Factors: 4.0 8.0 13.0Torque, in-lbs: 25 35 45Valve Sizes 1-1/2" 2"Cv Factors: 38.0 39.0 Torque, in-lbs: 70 70Tested cycle life: 1,000,000+ all sizes

    Dimensions:

    dimensional drawing of series TMBV manual 3-way ball valves

    Valve Size 1/2" 3/4" 1" 1�" 2"
    DIM IN MM IN. MM IN. MM IN MM IN. MM
    A 4.125 104.8 4.625 117.5 5.5 139.7 6.75 171.5 8.0 203.2
    B 3.0 76.2 3.75 95.3 4.312 111.1 6.125 155.6 6.125 155.6
    C 3.125 79.4 3.75 95.3 3.75 95.3 4.5 114.3 4.5 114.3
    D 2.0 50.8 2.5 63.5 3.0 76.2 4.0 101.6 4.0 101.6
    E 2.25 57.2 2.75 69.9 3.25 82.6 4.125 104.8 4.125 104.8
    F 1.75 44.45 2.25 57.15 2.5 63.5 3.37 85.60 3.68 93.47
    G 2.75 69.85 3.31 84.07 3.81 96.77 5.00 127.0 5.56 141.2


    Ordering Information:

    Pipe Size Cv Factor Model Numbers Seal Materials
    Geon� PVC Corzan� CPVC
    1/2" 4.0 TMBV050VT-PV
    TMBV050EPT-PV
    TMBV050VT-CP
    TMBV050EPT-CP
    (Viton Seals)
    (EPDM Seals)
    3/4" 8.0 TMBV075VT-PV
    TMBV075EPT-PV
    TMBV075VT-CP
    TMBV075EPT-CP
    (Viton Seals)
    (EPDM Seals)
    1" 13.0 TMBV100VT-PV
    TMBV100EPT-PV
    TMBV100VT-CP
    TMBV100EPT-CP
    (Viton Seals)
    (EPDM Seals)
    1�" 38.0 TMBV150VT-PV
    TMBV150EPT-PV
    TMBV150VT-CP
    TMBV150EPT-CP
    (Viton Seals)
    (EPDM Seals)
    2" 39.0 TMBV200VT-PV
    TMBV200EPT-PV
    TMBV200VT-CP
    TMBV200EPT-CP
    (Viton Seals)
    (EPDM Seals)
    IMPORTANT MUST READ: A two-hole ball is standard with 180� uni-directional rotation. To specify a three-hole ball, please add -A after the part number, for example, TMBV200EPT-CP-A. Model numbers listed above are for THREADED end connectors...if socket ends are desired, change the T in the part number to S. For example, TMBV200EPS-CP.

    CAD Drawing:

    If you need a non-CAD drawing of Series TMBV, you may simply right-click the dimensional drawing above, and "save as" in your desired directory.

    如果你想.dwgfile, please click on the CADlink icon below.

    Please click here to link to CAD file page with .DWG and 3D files


    HELPFUL LINKS:

    3-Way Solenoid Valves:If you need an actuated valve with instantaneous on/off control, or a much smaller sized valve, or a lower-cost valve...Series THPis a compact 3-way solenoid valve.

    Series MBV -- True BlueBall Valves-- Manual version of Plast-O-Matic's popular ball valveline; constructed with integral mounting lugs for easy addition of anactuator when needed. Features also include Trunnion design, reinforced shaft and PTFE thrust washer. 2-way and 3-waydesigns. Socket, threaded, flanged ends, NPT, BSP or Metric; customizingavailable.

    Series ABV -- ActuatedBall Valves——气动或液压致动器s for2-way and 3-way ball valves, sizes 1/2", 3/4", and 1". Air x air and "failsafe" air x spring models available; converts easily between types. Manualoverride standard.

    Series ABR -- ActuatedBall Valves——气动或液压致动器s for2-way and 3-way ball valves, sizes 1-1/4", 1-1/2", and 2". Air x Air and"fail safe" Air x Spring models available. Manual override standard on airx air, optional on air x spring version. Air x spring converts easilybetween fail safe "open" and fail safe "closed."

    Series TABV & TABR --Actuated Ball Valves-- Explanatory page for pneumatically orhydraulically actuated 3-way ball valves, all sizes. For actuatorspecifications, use the above links for the appropriate size.

    Online Pressure DropCalculator-- Allows you to easily determine the probable pressuredrop across a valve.Note: For comparison and illustrative purposesonly; not to be relied on for system design.


    Additional Info:Catalog RequestCatalog TEBV


    Plast-O-Matic Valves, Inc.
    1384 Pompton Avenue
    Cedar Grove, NJ 07009 USA
    Voice: (973) 256-3000
    Fax: (973) 256-4745

    email

    Top of Page

    Geon� is a registered trademark of the Geon Co.; Viton� is a registered trademark of DuPont Dow Elastomers.
    Corzan� is a trademark of Noveon, Inc.

    TRUE BLUE® and FAIL-DRY® are registered trademarks of Plast-O-Matic Valves, Inc.
    CADlink© Plast-O-Matic Valves, Inc. 2001

    Copyright � 1997-2006, 2015 Plast-O-Matic Valves, Inc.